Seatbelt Height Adjustment; Safety Belt Extension Assembly - Ford 2016 TRANSIT CONNECT Owner's Manual

How to Use the Automatic Locking
Mode
E142591
1. Buckle the combination lap and
shoulder belt.
2. Grasp the shoulder portion and pull
downward until the entire safety belt
is pulled out.
Allow the safety belt to retract. As the
safety belt retracts, you will hear a clicking
sound. This indicates the safety belt is now
in the automatic locking mode.
How to Disengage the Automatic
Locking Mode
Unbuckle the combination lap and
shoulder belt and allow it to retract
completely to disengage the automatic
locking mode and return the safety belt to
the vehicle sensitive (emergency) locking
mode.

Safety Belt Extension Assembly

WARNING
Do not use extensions to change the
fit of the shoulder belt across the
torso.
If the safety belt is too short when fully
extended, a safety belt extension assembly
can be obtained from an authorized dealer.
Tourneo Connect/Transit Connect (CHC) Canada/United States of America, enUSA, First Printing
Seatbelts
Only use extensions manufactured by the
same supplier as the safety belt.
Manufacturer identification is located at
the end of the webbing on the label or the
retractor behind the trim. Only use an
extension if the safety belt is too short for
you when fully extended.
SEATBELT HEIGHT
ADJUSTMENT
Position the safety belt height
adjuster so that the safety belt rests
across the middle of your shoulder.
Failure to adjust the safety belt correctly
could reduce its effectiveness and increase
the risk of injury in a crash.
E165022
1. Press the button.
2. Slide the height adjuster up or down.
3. Release the button and pull down on
I n f o r ma t i o n P r o v i d e d b y :
the height adjuster to make sure it is
locked in place.
31
WARNING
1
2
2
3