•
To clear Device Mappings for missing devices, press C at any time while on this screen.
Device Properties screen
The Device Properties screen displays information about a specific device. To access this screen, press
Alt+D when the cursor is in the Device Identifier field of a device on the SAS Topology screen.
•
To move to the next device, press Alt+N.
•
To move back to the previous device, press Alt+P.
This screen also provides access to the Format and Verify screens. To reach either of these screens, move
the cursor to the appropriate field, and then press Enter.
Device Format screen
Use the Format screen to format a particular device. To access this screen, press Enter in the appropriate
field on the Device Properties screen.
SAS BIOS configuration utility 10