Download Print this page

Makita 90350 Instruction Manual page 4

Cordless finishing sander

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
Length of Cord (Feet)
25
50
AWG Size of Cord
18
18
I.
SAVE THESE INSTRUCTIONS
-
This manual
100
150
18
16
contains important safety and operating instructions for battery charger.
2.
Before using battery charger, read all instructions and cautionary markings
on
(1)
battery charger, (2) battery, and
(3)
product using battery.
3.
CAUTION
-
To reduce risk of injury, charge only MAKITA Battery
7000.
Other types of batteries may burst causing personal injury and damage.
4. Do not expose charger t o rain or snow.
5.
Use of an attachment not recommended or sold by the battery charger
manufacturer may result in a risk of fire, electric shock, or injury t o persons.
6.
To reduce risk of damage t o electric plug and cord, pull by plug rather than
cord when disconnecting charger.
7.
Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected t o damage or stress.
8.
A n extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size, and shape
b.
That extension cord is properly wired and in good electrical condition; and
c. That wire size is at least as large as the one specified in the table below.
as those of plug on charger;
TABLE
1
4

Advertisement

loading

This manual is also suitable for:

9035dw9035d