Loop Gain; Reset - AT&T SB3014 User Manual

Settings
Conference speakerphone settings

Loop gain

The default setting of the loop gain feature is Off. Turn this feature on
only when the callers cannot hear you well, and you are using a public
switched telephone network (PSTN) line.
1. Press in idle mode to enter the main menu.
2. Press or
3. Press or
4. Press or
5. Press to save your preference. There is a confirmation tone and the
screen returns to the previous menu.
NOTE: Turn the loop gain feature back to Off if the callers cannot observe any
improvement or are experiencing any new audio issues like echo or dropout.

Reset

You can reset the base unit to the default settings. Once the base unit is
reset, all your customized settings, call log entries, and redial entry will be
deleted. All the phonebook records and speed dial entries will remain.
The default settings are listed, as shown below.
Feature
Call log
Listening volume
Ringer volume
Ringer tone
Date and time
LCD language
Base name
Key tone level
Dial mode
Area code
Loop gain
1. Press in idle mode to enter the main menu.
2. Press or
3. Press or
4. The screen prompts Reset to default? Press
to the default values and the screen returns to idle mode.
to scroll to Settings, then press
to scroll to Loop gain, then press
to choose On or Off.
to scroll to Settings, then press
to scroll to Reset, then press
Default Value
Empty
Volume 6
Volume 4
Tone 1
Empty
English
Conference Phone
Level 2
Touch-tone
Empty
Off
.
. The settings are reset
21
Area code
>Loop gain
.
.
LOOP GAIN
>Loop gain: Off
Loop gain
.
>Reset
