Advertisement
Holding
tool
Hold
the
tool as
shown
in
the figure.
When drilling a large diameter hole, hold
the tool firmly with both hands.
Switch action
Move the reversing switch lever
to
the
"FWD" position for clockwise rotation or
the "REV" position for counterclockwise.
To start the tool, simply pull the trigger.
Release the trigger to stop. When the revers-
ing switch lever
is
in the neutral position,
the tool will not start even if you pull the
trigger.
I\
\
I
ill
Reversing
switch lever
FWD
CAUTION :
0
Always check the direction of rotation before drilling.
*Use the reversing switch lever only when the tool comes to a complete stop. Changing
When not operating the tool, keep the reversing switch lever in the neutral position.
the direction of rotation before the tool stops may ruin the tool.
7
Advertisement
