Specifications - Sony HT-CT380 Operating Instructions Manual

Specifications

Bar Speaker (SA-CT380/
CT381, SA-CT780)
Amplifier section
POWER OUTPUT (rated)
Front L + Front R:
50 W + 50 W (at 4 ohms, 1 kHz, 1%
THD)
POWER OUTPUT (reference)
SA-CT380/CT381:
Front L/Front R: 100 Watts (per
channel at 4 ohms, 1 kHz)
SA-CT780:
Front L/Front R: 105 Watts (per
channel at 4 ohms, 1 kHz)
Inputs
HDMI IN* 1/2/3
ANALOG IN
DIGITAL IN (TV)
Outputs
HDMI OUT** (ARC)
* HT-CT380/CT381: The 1, 2, and 3 jacks
are identical. Using any of them makes
no difference.
HT-CT780: The 1 jack supports HDCP 2.2
protocol. HDCP 2.2 is newly enhanced
copyright protection technology that is
used to protect content such as 4K
movies. The 2 and 3 jacks are identical.
Using any of them makes no difference.
** HT-CT780: The HDMI OUT jack supports
HDCP 2.2 protocol. HDCP 2.2 is newly
enhanced copyright protection
technology that is used to protect
content such as 4K movies.
HDMI Section
Connector
Type A (19pin)
BLUETOOTH section
Communication system
BLUETOOTH Specification version 3.0
Output
BLUETOOTH Specification Power Class
2
Maximum communication range
Line of sight approx. 10 m
Maximum number of devices to be
Frequency band
Modulation method
Compatible BLUETOOTH profiles
Supported Codecs
Transmission range (A2DP)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
operating system, software application,
etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
5)
Advanced Audio Coding
Front L/Front R speaker section
Speaker system
Speaker
General
Power requirements
Power consumption
1)
registered
9 devices
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
FHSS (Freq Hopping Spread Spectrum)
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
3)
4) 5)
SBC , AAC
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
SA-CT380/CT381: Full range speaker
system, Acoustic suspension
SA-CT780: 2-way speaker system,
Acoustic suspension
SA-CT380/CT381: 60 mm cone type
SA-CT780: Woofer: 60 mm cone type
Tweeter: 19 mm
soft dome type
220 V - 240 V AC, 50 Hz/60 Hz
SA-CT380/CT381:
On: 37 W
Standby: 0.3 W or less
(at the Power saving mode,
see page 21)
2)
37
GB