Sony HT-CT800 Startup Manual

4-687-592-32(1)
Sound Bar
Startup Guide
Refer to the Operating Instructions
(separate document) for what you
can do with the system and the
network settings.
HT-CT800
1
Deciding the installation position
Subwoofer
Note
• Do not place magnetic cards on the system or near the system.
• Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
What's in the box
Bar Speaker (1) Wall mounting bracket (2)
Screw (2) Subwoofer (1)
R03 (size AAA) battery (2) Optical digital cable (1)
Operating Instructions Startup Guide (this document)
About the operation method of the system
Connect this system and the TV with the HDMI cable (not supplied) to display the operation screen
of the system on the TV. Prepare the HDMI cable.
To mount the Bar Speaker on a wall
Refer to "Mounting the Main Unit on a Wall" in the Operating Instructions (separate
Bar Speaker
document).
2
Connecting with a TV and other devices
Foot (2)
Remote control (1)
WALL MOUNT TEMPLATE (1)
Blu-ray Disc™ player, cable
box or satellite box, etc.
: Video signals
: Audio signals

Connect devices such as a Blu-ray Disc player, cable box, or satellite box to any of the HDMI IN jacks (HDMI1/2/3) on the Bar Speaker.
When devices such as a Blu-ray Disc player, cable box, or satellite box are currently connected to a TV, disconnect them from the TV and then connect them to the Bar Speaker to reproduce
the high quality surround sound of Dolby TrueHD, DTS-HD, DTS.

Connect a TV to the HDMI OUT jack on the Bar Speaker. If the TV is not compatible with ARC, also connect the TV to the TV IN OPTICAL jack on the Bar Speaker.
Tip
• The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.
Adjust the setting as follows: Press HOME -
• When your TV does not have both an OPTICAL OUT jack and an HDMI IN jack, refer to "Connecting a TV or Portable Audio Device via the ANALOG IN Jack" in the Operating Instructions (separate document) for a connection
method.
Note
• Make sure that the cables are firmly inserted.
• To watch 4K video content, refer to "Connecting a 4K TV and 4K Devices" in the Operating Instructions (separate document).
3
Setting up the remote control
Is the HDMI IN jack on your TV labeled "ARC" ?
YES
HDMI cable Optical digital cable
(not supplied) (supplied)
HDMI cable
(not supplied)
Blu-ray Disc player, cable
box or satellite box, etc.
: Video signals
: Audio signals
[Setup] - [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].
NO
HDMI cable
(not supplied)
HDMI cable
(not supplied)
Continued on back page
© 2017 Sony Corporation Printed in Malaysia