Installing The Interface Cable; Removing The Interface Cable - Motorola LS2208AP Quick Reference Manual

Quick Reference Guide

Installing the Interface Cable

Plug the interface cable modular connector into the
1.
cable interface port on the bottom of the scanner's
handle.
Cable interface
port
Connect the other end of the interface cable to the
2.
host.
Connect the power supply to the cable (if necessary).
3.
Scan the appropriate bar code(s) beginning on page
4.
29 to communicate with the host.

Removing the Interface Cable

Unplug the installed cable's modular connector by
depressing the connector clip with the tip of a screwdriver.
Interface cable
modular connector
5