Scanner Labeling; Power Supply - Motorola LS2208AP Quick Reference Manual

Quick Reference Guide
Caution: Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous laser light
exposure.
Class 2 laser scanners use a low power, visible light diode. As with
any very bright light source, such as the sun, the user should avoid
staring directly into the light beam. Momentary exposure to a Class 2
laser is not known to be harmful.

Scanner Labeling

Power Supply

Use ONLY a LISTED Motorola, Type no. 50-14000 (12Vdc/3.33A) or
PWRS-14000 (12Vdc/3.33A), Direct Plug-In Power Supply, marked
Class 2 or LPS (IEC60950-1, SELV). Use of an alternative Power
Supply will invalidate any approvals given to this unit and may be
dangerous.
LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2
LUMIERE LASE-NE PAS REGARDER DANS LE FAISCEAU
APPAREIL A LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT
STARE INTO BEAM. IEC CLASS 2 LASER PRODUCT 630-680 nM, 1.0 mW LASER
C A U T I O N
LASER LIGHT -DO NOT
STARE INTO
630-680nM LASER
1.0 mW MAX OUTPUT
CLASS II LASER PRODUCT
BEAM
41