Table of Contents
Advertisement
Recording memory full
If the recording memory becomes full while a caller is leaving a
message, they will hear "Thank you for calling" and the answering
machine will hang up.
Any new callers will hear the Answer only message.
If the memory is full you must delete messages before your
BT Graphite 2500 can begin recording again.
Message playback
1. Press
. The number of messages is announced and they
are played back.
During playback, press:
to play the next message.
once to skip back to the start of the current message or
twice to play the previous message.
to delete the current message.
to stop playback.
Adjust base speaker volume
1. Press
to decrease the speaker volume or
the volume. The volume level will be shown on the counter
display for a few seconds after the button is pressed.
Delete all old messages
New, unplayed messages cannot be deleted, you must play them first.
1. To delete all old messages, press and hold
Play the current outgoing message
1. In standby, press
played.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp.com
. Your current outgoing message will be
Each message is played back with the
day and time of the call announced.
After the last message you will hear
"End of messages".
If there are no messages, you will
hear, "You have no messages"
when you press
There are 10 base speaker volume
levels. The default is level 5.
to increase
.
28
.
Hide quick links:
Advertisement
Table of Contents
