GE AQP08 Owner's Manual page 12

Installation Instructions
Replace the
Air Conditioner
Attach the
Front Grille
Install the
Window Gasket
12
Slide the air conditioner back
into the case. Replace the 4 screws
removed earlier in the top and
sides of the case.
1 Attach the front grille slipping
the vent lever through the
opening between the horizontal
louver and the grille. Hook the
case top.
1 Cut the foam top window gasket
to the window width.
2 Stuff the foam between the
glass and the window to prevent
air and insects from getting into
the room.
2 Screw the front grille on at the
bottom corners with the 2 screws
previously removed.
3 If no filler panels are used,
you need to seal between the
window and the air conditioner
with filler.