GE AQP08 Owner's Manual page 11

Install the
Filler Panels
Install the Case
in the Window
1 Insert the right and left hand
filler panels into the top and
bottom rails.
1 Open the window and place the
case on the stool. Balance it and
close the window securely behind
the top rail. The case should be
slightly tilted to the outside.
2 Slide the filler panels out on
both sides into the sides of the
window jamb.
2 Secure them with six 13/32"
screws, three on each side.
3 Attach the case to the window
stool with three 1" screws work-
ing from the inside of the case.
4 Secure the top rail and filler
panels to the window sash with
three 1" screws. Using two 1"
screws, attach the filler panels to
the sill, one on each side. Do not
overtighten screws.
11