Using The Web Manager - D-Link DSL-500T User Manual

Using the Web Manager

All configuration and management of the Router is done using the web-based management interface pictured in
the above example. The various menus accessed by clicking on one of the directory tabs, Home, Advanced,
Tools, Status and Help. Each tab displays menu buttons located in the left hand panel of the web interface. The
table below lists the menus for each directory in the web manager.
Directory Configuration and Read-only Menus
Click the Home tab to access the Setup Wizard, Wireless LAN setup, WAN
Configuration, LAN IP Configuration, DHCP for the LAN Setup and DNS IP
Home
Configuration menus.
Click the Advanced tab to access the UPnP, Virtual Server, IP Filters, IP Routing,
Advanced
DMZ, Firewall, RIP, PPP, ADSL and ATM VCC menus
Click the Tools tab to access the Administrator Settings (used to set the system user
name and password), System Time Configuration, System Settings (load and save
Tools
configuration files), Firmware Upgrade, Miscellaneous Configuration (Save & Reboot,
Ping test, enable IGMP) and Diagnostic Test menus.
Click the Status tab to view the Device Information, Event Log, Traffic Statistics and
Status
ADSL Status information windows.
The Help menu presents links to pages that explain various functions and services
Help
provided by the Router.
Click on a menu button
to use or view the menu
Web Manager – First Time Log On
Click here to Run
the Setup Wizard
27
Click on a tab to
view the menus
available in that
directory