Access The Configuration Manager - D-Link DSL-500T User Manual

Hide thumbs Also See for DSL-500T:

Table of Contents

Access the Configuration Manager

Now that your computer's IP settings allow it to communicate with the Router, you can access the configuration

software.

Be sure that the web browser on your computer is not configured to use a proxy server

in the Internet settings. In Windows Internet Explorer, you can check if a proxy server is

enabled using the following procedure:

1. In Windows, click on the Start button, go to Settings and choose Control Panel.

2. In the Control Panel window, double-click on the Internet Options icon.

3. Click the Connections tab and click on the LAN Settings button.

Note

4. Verify that the "Use proxy server" option is NOT checked. If it is checked, click in the

checked box to deselect the option and click OK.

Alternatively, you can access this Internet Options menu using the Tools pull-down

menu in Internet Explorer.

To use the web-based management software, launch your web browser software and use the LAN IP address of

the Router to access the management software. The default LAN IP address of the Router is used in the Address

bar of your web browser window. Type in http:// followed by the default IP address, 10.1.1.1in the address bar

of the browser. The URL in the address bar should read: http://10.1.1.1 - a dialog box similar to the one pictured

below will appear on your desktop. Type in the default User Name: admin and the default Password: admin.

When you successfully connect to the web manager, the Home directory tab will display the Setup Wizard

menu. You can launch the Setup Wizard from this page or use the menu buttons located in the left panel of the

web page to view other menus used for basic configuration. You may use the Setup Wizard if your Internet

connection is a PPPoE connection. If you are using a PPPoE and connection and want to use the Setup Wizard,

follow the instructions below. If your Internet connection is a PPPoA, Bridge, Static IP, or Dynamic IP type

connection, you should follow the instructions below in the section Configure WAN Connection.

Table of Contents