Recording A Tv Programme; Timer Recording - Orion COMBI 1415X Operating Instructions Manual

RECORDING A TV
PROGRAMME
RECORDING AND VIEWING THE SAME TV PRO-
GRAMME
1
Load a cassette tape with the
erase prevention tab intact.
2
Press SP/LP to select the desired tape speed SP or
LP.
3
Press the 10 number buttons
or (CHANNEL) + or – to
select the channel to be
recorded (Example: Channel
2).
4
Press REC/OTR.
2
One index mark will be recorded
and the REC/OTR indicator will
light.
TO STOP RECORDING
Press (STOP).
3
TO STOP RECORDING TEMPORARILY
Press 4/X (PAUSE/STILL) to stop
recording of unwanted material. The
REC/OTR indicator will blink on and
off.
Press again to continue the recording.
NOTES:
• To prevent damage to the video head and video tape
the pause function will stop the VCR operation after
about 5 minutes.
• AUTO REWIND FEATURE:
This unit will automatically rewind and eject the tape when
the tape has ended (except during OTR and
TIMER REC).
• If the erase prevention tab has been removed, the tape
will eject when REC/OTR is pressed.
2
•
If the power is switched off during recording, the TV
section shuts off and the VCR section continues to record.
•
The unit's channel cannot be changed during recording.
•
If you change the channel during a recording,
"GRABACION ACTIVA" will appear on the TV screen
for approx. 4 seconds.
5H00701A P19-21
CH 2
CH 2
INDICE
REC/OTR
CH 2
REC/OTR
19

TIMER RECORDING

Timer recording can be programmed on screen with the
remote control. The built-in timer allows automatic unat-
tended recording of up to 8 programmes within 1 month.
PREPARATION:
• Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
• Make sure that the clock shows the present time correctly.
EXAMPLE: Programme a timer recording for 13:00-14:30,
channel 3, on timer programme number 1 (Tape speed : LP).
1
Check that the AJUSTE GRAB
TEMPORIZADA option is se-
lected, then press ENTER.
2
Press or to select one of the
program line, then press ENTER.
3
or 10 number but-
Press /
tons
to select the desired date or
every day or every week setting,
then press .
4
Set the start time, end time, channel and tape speed as
in step 3.
When you have finished setting all your recordings, press
ENTER. Press MENU repeatedly until the TV picture
appears on the screen.
AJUSTE GRAB TEMPORIZADA
DATA 23 SAB
COMIEN 13 : 00
FIN 14 : 30
CH 3
VELOCIDAD LP
SELEC :
SINTONIZAR :
SALIR : MENU OK: ENTER
• When you set the minute, you can change in 10-minutes
step by holding down
To set the timer for another programme, press
until a blank programme line blinks, then press ENTER.
Repeat steps 3 to 4 to set the second programme.
5
Press TIMER REC. The TIMER REC indica-
tor will light. The Timer is programmed, when
the programmed time is reached, the record-
ing is automatically started.
To cancel timer recording, press the button again and
TIMER REC indicator will go out.
NOTES:
• The VCR section cannot be used while the TIMER REC indicator is
lit. If you want to use the VCR operation, press TIMER REC to
deactivate the timer.
• If there is a power failure, the power plug is disconnected, or the
MAIN POWER (ON) Switch is switched off for more than approx. 30
mins, all programmed timer recordings and clock settings will be
lost. In this case, reset the clock (see page 11) and reprogram any
timer recordings.
• If you want to correct the digits while setting, press
you want to correct flashes, then correct the desired setting.
• If programming is performed without a tape in the unit, or with a
tape without an erase prevention tab, the Timer Recording is not
possible. If a tape without an erase prevention tab is in the unit, the
tape will be ejected.
• To record from external equipment connected via the SCART socket
(AV1) or the front AV socket (AV2), press AV epeatedly until "AV1"
or "AV2" appears when setting the channel in step 4.
12/11/03, 10:15 AM
AJUSTE GRAB TEMPORIZADA
REPETIDOR AUTO [OFF]
SINTONIZAR CANAL
SINTONIZAR TV
SINTONIZAR SISTEMA
SELEC : / ENTER
SALIR : MENU
AJUSTE GRAB TEMPORIZADA
DATA 23 SAB
COMIEN 11 : 30
FIN :
CH 1
VELOCIDAD SP
SELEC :
SINTONIZAR : / 0 - 9
SALIR : MENU
23 SAB 13 : 00 14 : 30 3
LP
SELEC : / ENTER
SALIR : MENU
button.
or
TIMER REC
until the item
19