Secura Key Radio Key 600 Operating & Installation Manual page 14

Radio Key 600 Operating & Installation
®
RK600 Wire Connections
Max relay power rating
Use a Separate Power Supply for Electric Locks
The access control unit and the electric locking device should be
connected to separate power supplies. Install the MOV provided as
shown below:
Figure 2 - MOV Wiring Diagram
Auxiliary Reader Wire Connections
A short cable assembly extends from the back of the Optional Auxiliary
Reader. Connect Plug P2 at the end of the cable to Socket J2 at the RK600
Unit. If the cable must be extended, for the best performance, use TWO
Secura Key Ÿ 10