Attachment, Deflector, Handle And Harness - Stihl FS 40 Instruction Manual

English
Approved Combinations of Cutting Attachment, Deflector, Handle and Harness
Cutting Attachment
1
3
4
Approved Combinations
The complete combination includes:
Cutting attachment
–
Deflector
–
Handle
–
Harness/shoulder strap (special
–
accessory)
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons no other
combinations are permitted – risk of
accidents.
Cutting Attachments
Mowing heads
1 STIHL AutoCut C 5-2
14
Deflector
2
5
2 STIHL AutoCut 5-2
3 STIHL FixCut 5-2
4 STIHL DuroCut 5-2
5 STIHL PolyCut 6-3
Deflector
6 Deflector with blade for mowing
heads
Handle
7 Loop handle
Harness
8 Shoulder strap may be used
WARNING
Based on the cutting attachment being
used:
Handle
6
7
Harness
8
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment.
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only mowing heads may be used on
loop-handled trimmers with a curved
drive tube.
FS 40, FS 40 C, FS 50, FS 50 C