Vsp600 Configuration Methods - VTech ErisTerminal VSP600 Administrator And Provisioning Manual

VSP600 Configuration Methods

You can configure the VSP600 using one of the following methods:
 From the VSP601 handset, using the handset menus. The VSP601 menus are
best suited to configuring a few settings, perhaps after the initial setup has been
done. For administrators, the settings available on the VSP601 menus include
network settings, account settings, and provisioning settings. See
Admin Settings Menu" on page
VSP601are most useful for end users. Through the menu, they can customize the
screen appearance, sounds, and manage calls. For more information, see the
VSP600/VSP601 User Guide.
 The Web User Interface, or WebUI, which you access using your Internet browser.
See
navigate and best-suited to configuring a large number of VSP600 settings at once.
The WebUI gives you access to every setting required for configuring a single
device. You can enter service provider account settings on the WebUI, assign
accounts to handsets, and set up provisioning, which will allow you to automatically
and remotely update the VSP600 after initial configuration.
 Provisioning using configuration files. Working with configuration files allows you to
configure the device at regular intervals. There are several methods available to
enable the VSP600 to locate and upload the configuration file. For example, you
can enable the VSP600, when it starts up or reboots, to check for the presence of
a configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the VSP600 automatically downloads the file and
applies the new settings. For more information, see
Configuration Files" on page
Introducing the VSP600
"Using the WebUI" on page
69.
13
VSP600 Administrator and Provisioning Manual
18. Most of the settings accessible on the
24. The browser-based interface is easy to
"Provisioning Using
"Using the
Back to Contents