After Finishing Work; Storing The Machine - Stihl SR 200 Instruction Manual

English

After Finishing Work

Close the valve lever.
N
Shut off the engine – see "Starting /
N
Stopping the Engine".
Draining the Solution Container
1
Turn metering knob (1) to 6.
N
Open the valve lever and drain
N
remaining solution into a suitable
container.
Cleaning the Solution Container
Rinse and clean the solution
N
container and hose system with
clear water.
Dispose of remaining spray solution
N
and rinsing liquid in accordance with
local environmental requirements –
follow maker's instructions.
Allow the unit to dry with the cap
N
removed.
24
If strainer is dirty:
Insert a suitable tool (e.g.
N
screwdriver) in the two recesses
(arrows) to loosen the strainer (2).
Pull the strainer (2) upward and out
N
of the solution container.
2
Clean the strainer (2) with clear
N
water and a brush.

Storing the Machine

Store the machine in a dry, high or
N
locked location sheltered from frost
– out of the reach of children and
other unauthorized persons.
For periods of 3 months or longer
Drain and clean the fuel tank in a
N
well ventilated area.
Dispose of fuel properly in
N
accordance with local
environmental requirements.
Run the engine until the carburetor
N
is dry – this helps prevent the
carburetor diaphragms sticking
together.
Thoroughly clean the machine – pay
N
special attention to the cylinder fins
and air filter.
Do not expose the container to
N
direct sunlight for unnecessarily
long periods. UV rays can make the
container material brittle, which
could result in leaks or breakage.
SR 200