Engine Running Behavior; Rewind Starter; Inspections And Maintenance By Dealer - Stihl SR 200 Instruction Manual

English

Engine Running Behavior

If engine running behavior is
unsatisfactory even though the air filter
is clean and the carburetor is properly
adjusted, the cause may be the muffler.
Have the muffler checked for
contamination (carbonization) by your
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
28

Rewind Starter

To help prolong the wear life of the
starter rope, observe the following
points:
Pull the starter rope only in the
N
direction specified.
Do not pull the rope over the edge of
N
the guide bushing.
Do not pull out the rope more than
N
specified.
Do not allow the starter grip to snap
N
back, guide it back into the housing
slowly – see chapter on "Starting /
Stopping the Engine."
Have a damaged starter rope replaced
by your dealer before it breaks
completely. STIHL recommends that
you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Inspections and Maintenance
by Dealer
Spark Arrestor in Muffler and Spacer
If the engine is down on power,
N
have the spark arrestor in the
muffler checked.
Check spacer for damage.
N
Have damaged spacer replaced
N
immediately.
SR 200