Panasonic KX-TGF380 Operating Instructions Manual page 72

Useful Information
Problem
The 2nd caller's information is not
displayed during an outside call.
Using Bluetooth devices
Problem
I cannot copy phonebook entries
from a cellular phone.
I cannot have a conversation
using the headset.
or
I cannot connect my headset to
the base unit.
Noise is heard during a call on
the headset.
Some headset enhanced
features are not available.
An error tone is heard when I try
to program the Bluetooth feature.
72
TGF38x(en)_1205_ver101.pdf 72
Cause/solution
R In order to use Caller ID, call waiting, or Call Waiting Caller ID
(CWID), you must first contact your phone service provider and
subscribe to the desired service.
After subscribing, you may need to contact your phone service
provider again to activate this specific service, even if you
already subscribed to both Caller ID and Call Waiting with Caller
ID services (CWID).
Cause/solution
R Confirm that the cellular phone supports Bluetooth wireless
technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another Bluetooth
device such as a Bluetooth headset, turn it off or disconnect it
from the cellular phone.
R Someone is using a cellular line or headset. Try again later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit's phonebook, the entry
cannot be copied even by selecting another group.
R iPhone does not support individual phonebook copy.
R Confirm that the Bluetooth wireless headset supports the
HeadSet Profile (HSP) specification.
R Your Bluetooth headset is not paired. Pair it (page 55).
R Turn your headset off, then turn it on and try again.
R If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the headset
from your cellular phone, then perform the connecting
procedure from the base unit.
R Only 2 Bluetooth devices can be used with the unit at the same
time (for example, 2 cellular lines, or the headset and 1 cellular
line).
R A Bluetooth headset can communicate with the base unit within
a range of approximately 10 m (33 feet). The connection may
be subject to interference from obstructions such as walls or
electronic devices. Move closer to the base unit.
R The base unit does not support enhanced features such as Last
number redial or Call reject.
R The Bluetooth feature cannot be accessed immediately after
connecting the AC adaptor to the base unit. Wait a few seconds
and try again.
R The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting. Wait a
few seconds and try again.
For assistance, please visit www.panasonic.com/support
2014/12/05 10:20:16