Making/Answering Calls Using The Handset; Making Cellular Calls; Making Landline Calls - Panasonic KX-TGF380 Operating Instructions Manual

Making/Answering Calls Using the Handset

Making cellular calls

Important:
R The unit can be used to talk on 2 lines at the
same time (for example, 2 cellular lines, or the
landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with the
unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
R Before making calls, confirm that the
corresponding on the handset is displayed
(page 13).
1
Lift the handset and dial the phone number.
R To correct a digit, press MCLEARN.
2
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 19).
Go to step 4.
3
MbN: Select the desired cellular phone. a
MSELECTN
4
When you finish talking, press MOFFN or place
the handset on the charger.
Note:
R To switch to the speaker, press MZN.
To switch back to the receiver, press MZN/M
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Note:
R The receiver or speaker volume you set is kept
for each line (landline and cellular lines).
Making a cellular call using the redial list
The last 5 phone numbers dialed are stored in the
redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 19).
4
MbN: Select the desired cellular phone. a
MSELECTN
20
TGF38x(en)_1205_ver101.pdf 20
N.
For assistance, please visit www.panasonic.com/support
Erasing a number in the redial list
n When a cellular phone is paired:
1
MEN REDIAL
2
MbN: Select the desired phone number. a
MMENUN
3
MbN: "Erase" a MSELECTN
4
MbN: "Yes" a MSELECTN
5
MOFFN
n When a cellular phone is not paired:
1
MEN REDIAL
2
MbN: Select the desired phone number. a
MERASEN
3
MbN: "Yes" a MSELECTN
4
MOFFN

Making landline calls

1
Lift the handset and dial the phone number.
R To correct a digit, press MCLEARN.
2
M N
3
When you finish talking, press MOFFN or place
the handset on the charger.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/M
Making a call using the redial list
The last 5 phone numbers dialed are stored in the
redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M N
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed
(page 34).
Example: If you need to dial the line access
number "9" when making outside calls with a PBX:
2014/12/05
N.
10:20:12