Tuning to radio stations
1
Press POWER ON•OFF to switch on the last selected
source.
2
Press TUNER•BAND (or press SOURCE on the
remote control repeatedly) to select TUNER mode.
3
Press TUNER•BAND again to select the desired band :
FM or AM.
Press and hold S or T (or í / ë on the remote
4
control) until the frequency indication starts to change, then
release.
➜ The system automatically tunes to the next strong radio
station.
STEREO
G To tune to a weak station, press S or T (orí / ë
on the remote control) briefly and repeatedly until an
optimal reception is found.
G To reduce the noise and make the radio reception clearer,
press ST/MONO to switch to monaural mode.
5
Repeat step 4 if necessary until you find the desired radio
station.
Presetting radio stations
You can preset up to 40 stations regardless of the
reception.
1
Tune to your desired radio station (refer to "Tuning to
radio stations".)
2
Press SLOW/MEM.
➜ "PROG" icon starts flashing.
STEREO
3
Use the numeric keypad (0-9, >10) to select the
desired preset number.
➜ If "PROG" icon goes off before you select the desired
preset number, press SLOW/MEM again.
STEREO
4
Press SLOW/MEM again or wait for a few seconds to
store the radio station.
G Repeat steps 1–4 to store other radio stations.
Helpful Hint:
– During programming, if no button is pressed within five
seconds, the system will exit the program mode automatically.
L
R
S
PROG
L
R
S
PROG
L
R
S
Radio Reception
Listening to preset radio
stations
G In tuner mode, press à / á or use the numeric
keypad (0-9, >10) to select the desired preset number.
➜ The preset number, radio frequency, and waveband are
displayed.
R
R
23
ADIO
ECEPTION