Attaching The Vesa Cover; Connecting Your Monitor - Dell E2016 User Manual

Attaching the Vesa Cover

NOTE: The vesa cover is detached when the monitor is shipped from the factory.
1
Insert the two tabs on the upper part of the vesa cover in the slots on the
back of the monitor.
2
Press the vesa cover till it snaps into place.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
To connect your monitor to the computer:
1 Turn off your computer.
2 Connect the VGA cable from your monitor to the computer.
3 Switch on your monitor.
Setting Up the Monitor | 17