Setting Up The Monitor; Attaching The Stand - Dell E2016 User Manual

Setting Up the Monitor

Attaching the Stand

NOTE: The stand riser and stand base are detached when the monitor is shipped
from the factory.
NOTE: The procedure below is applicable for the default stand. If you purchased
any other stand, see the documentation shipped with the stand to set it up.
CAUTION: Do not remove the monitor from the packaging box before attaching
the stand.
Attach the stand assembly to the monitor.
1
Follow the instructions on the flaps of carton to remove the stand from the top
cushion that secures it.
2
Connect the stand riser to stand base.
3
Lift the cover, as shown.
Setting Up the Monitor | 15