Controls & Features; Handlebar Height Adjustment - Troy-Bilt Super Bronco Operator's Manual

Rear tine tiller
Hide thumbs Also See for Super Bronco:
Table of Contents

Advertisement

Available languages

Available languages

Controls & Features
NOTE: This Operator's Manual covers several garden tiller
models. The tiller depicted may differ from yours.
Engine Controls
For detailed information on all engine controls refer to the
separate Engine Operator's Manual.
Wheel Drive Pins
Each wheel is equipped with a wheel drive click pin that secures
the wheel to the wheel shaft. The wheels can be positioned in
either a wheel drive or a freewheel mode.
Forward Clutch Bail
The forward clutch bail controls the engagement of the forward
drive of the wheels and tines.
Reverse Handle Assembly
Forward Clutch Bail
Depth Regulator Lever

Handlebar Height Adjustment

Tines
Wheel Drive Pin
Figure 4-1
Reverse Handle Assembly
The reverse handle assembly controls the engagement of the
reverse drive of the wheels and tines.
Depth Regulator Lever
This lever controls the tilling depth of the tines. Pull the lever
back and slide it up or down to engage the notched height
settings.
Handlebar Height Adjustment
The handlebar height is adjustable to three different settings. In
general, adjust the handlebars so they are at waist level when the
tines are 3-4" in the ground.
4
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents