KYMCO Agility 125 Service Manual page 71

6. ENGINE REMOVAL/INSTALLATION
Remove the air cleaner bolts.
Remove the rear brake adjusting nut,
connecting pin and rear brake cable.
Remove the rear shock absorber lower
mount bolt.
Remove the four A.C. generator cooling fan
cover bolts and cooling fan cover.
Remove the engine mounting bolt and pull
out the engine with the engine hanger
bracket backward.
ENGINE HANGER BRACKET
REMOVAL
Remove the ignition coil from the engine
hanger.
Remove the engine hanger bracket bolt and
nut.
Remove the engine hanger bracket.
6-3
Rear Shock Absorber Lower Mount Bolt
AGILITY 125
Brake Adjusting Nut
Engine Mounting Bolt
Engine Hanger Bracket