KYMCO Agility 125 Service Manual page 146

13
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
REAR WHEEL
REMOVAL
Remove the exhaust muffler. ( 2-5)
Remove the rear axle nut to remove the rear
wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
If the rim runout exceeds the specified
service limits, check the final shaft bearing
for excessive play and the final shaft for
bending. Inspect the rear wheel and wheel
rim for runout.
Inspect the rear brake drum.
Measure the rear brake drum I.D.
Service Limits: 131mm replace if over
INSTALLATION
Install the rear wheel in the reverse order of
removal.
Tighten the rear axle nut.
Torque: 11.0-13.0kg-m
Install the exhaust muffler.
Torque:
Exhaust muffler joint lock nut: 1.0~1.4kgf-m
Exhaust muffler lock bolt: 3.0~3.6kgf-m
＊
First install and tighten the exhaust
muffler joint lock nuts and then the
exhaust muffler lock bolts.
Rear Axle Nut
AGILITY 125
13-2