Ringer Tone; Set Date And Time - VTech ErisStation VCS702 User Manual

Settings

Ringer tone

You can choose from different ringer tones on the base unit.
1. Press when the base unit is not in use.
to scroll to Ringers, and then press
2. Press or
to scroll to Ringer tone, and then press
3. Press or
The base unit displays RINGER TONE with the current setting. Press
4.
sample each ringer tone (Tone 1 to Tone 10).
5. Press to save your selection. You hear a confirmation tone.
If you turn off the ringer volume, you will not hear ringer tone samples.

Set date and time

Before using the ErisStation Conference Phone, set the date and time as follows. The
date and time will be displayed on the base unit when idle. If you subscribe to caller
ID service, the day, month, and time are set automatically with each incoming call.
However, the year must be correct so that the day of the week can be calculated from
the call log information.
1. Press when the base unit is not in use.
to scroll to Set date/time, and then press
2. Press or
3. Press or to select the month, and then press
enter a two-digit number (01-12).
4. Press or to select the date, and then press
enter a two-digit number (01-31).
5. Press or to select the year, and then press
enter a two-digit number (00-99), and then press
6. Press or to select the hour, and then press
enter a two-digit number (01-12).
7. Press or to select the minute, and then press
enter a two-digit number (00-59).
to select AM or PM.
8. Press or
9. Press to save the settings. You hear a confirmation tone.
• The base unit beeps twice if you enter an invalid number.
• You can press to correct the previous entry while editing.
11
.
.
If you subscribe to caller
.
, or use the dialing keys to
, or use the dialing keys to
, or use the dialing keys to
.
, or use the dialing keys to
, or use the dialing keys to
or to