Usb Power Supply - Sony FDR-X1000V How To Use Manual

OFF: Does not send the time code or user bit information.
BACK: Returns to the [TCOUT] menu.
*
Unavailable when [V.FMT] is set to [MP4].
R.CTL: Controls the recording on a device connected with HDMI.
ON: Controls the recording on the device.
OFF: Does not control the recording on the device.
BACK: Returns to the [R.CTL] menu.
*
Unavailable when [V.FMT] is set to [MP4].
BACK: Returns to the [HDMI] menu.
[49] How to use

USB Power Supply

When connecting the camera to a computer or USB device with the micro USB cable (supplied), the
camera can be set so the connected device supplies power to it.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [USBPw], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
ON: Supplies power from a connected device, through the micro USB cable.
OFF: Does not supply power from a connected device, through the micro USB cable.
BACK: Returns to the [USBPw] menu.
Note
Changing the Settings Camera settings