Sony FDR-X1000V How To Use Manual page 49

[42] How to use
Wi-Fi connection
You can operate the camera by using compatible devices (Live-View Remote, smartphone, etc.)
connected to the camera via Wi-Fi.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [Wi-Fi], then press the
ENTER button.
2. Press the NEXT button or PREV button to select the following setting on the camera, then press the
ENTER button.
ON: Operates a single camera with the compatible device.
OFF: Does not operate a camera with the compatible device.
MULTI: Operates multiple cameras with the compatible device.
NEW: Select [NEW] when you connect to the compatible device for the first time.
CRRNT: Select [CRRNT] when you connected to the compatible device before.
BACK: Returns to the [Wi-Fi] screen.
3. Displays [MOVIE], [LOOP], [PHOTO] or [INTVL].
4. Connect the camera to the compatible device via Wi-Fi.
5. Operate the camera with the compatible device.
Note
Battery consumption is quicker when you operate the camera with the compatible device.
[CRRNT] in [MULTI] does not appear when you connect to the compatible device for the first time.
The camera should only be connected to the devices described in "Using the camera connected to
other devices via Wi-Fi" via Wi-Fi, and should not be connected to other Wi-Fi access points. If you
choose to connect the camera to other Wi-Fi access points, then you do so at your own risk. In such
Changing the Settings Camera settings