Sony FDR-X1000V How To Use Manual page 63

BACK: Returns to the [V.SYS] menu.
3. Press the NEXT button or PREV button, then press the ENTER button while [OK] is displayed on the
display panel.
To cancel the NTSC/PAL setting, press the NEXT button or PREV button while [OK] is displayed to
select [CANCL], then press the ENTER button.
Note
When you change the NTSC/PAL setting, the camera will restart automatically.
[56] How to use
Version
Displays the software version of the camera.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [VER.], then press the ENTER
button.
[57] How to use
Format
Formatting is the process of deleting all images in the memory card, and restoring the memory card to
its initial state.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [FORMT], then press the
ENTER button.
2. Press the ENTER button to display [SURE?] after [OK] has been displayed, then press the ENTER
button again.
Formatting starts and [DONE] appears when formatting finishes.
To cancel formatting, press the NEXT button or PREV button while [SURE?] or [OK] is displayed to
select [CANCL], then press the ENTER button.
Note
Save important images before formatting.
Do not perform any of the following operations while formatting.
Changing the Settings
Changing the Settings
Camera settings
Camera settings