Usb Power Supply - Sony FDR-X1000V How To Use Manual

BACK: Returns to the [R.CTL] menu.
*
Unavailable when [V.FMT] is set to [MP4].
BACK: Returns to the [HDMI] menu.
[49] How to use

USB Power Supply

When connecting the camera to a computer or USB device with the micro USB cable
(supplied), the camera can be set so the connected device supplies power to it.
1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [USBPw], then
press the ENTER button.
2. Press the NEXT button or PREV button to select the following setting, then press the
ENTER button.
ON: Supplies power from a connected device, through the micro USB cable.
OFF: Does not supply power from a connected device, through the micro USB cable.
BACK: Returns to the [USBPw] menu.
Note
If you change the setting of the USB power supply while the micro USB cable is
connected, disconnect the cable, then reconnect.
Power may not be supplied properly from a USB device with a power supply capacity of
less than 1.5 A.
If you turn the power of the camera on while charging the battery pack, charging stops
Changing the Settings Camera settings