System Menu - Preferences; Accessing The Preferences Options; Recording; Sound - Magnavox MRV660 User Manual

Accessing the Preferences
options
1
Switch on the TV set. Select the correct
Video In channel at the TV.
2
Press SYSTEM-MENU on the remote
control.
➜
The system menu appears on TV.
3
Press 4 to select { Preferences .}
4
Press 2 repeatedly to select one of the
options from { Preferences } and press 4
to select a setting you want to adjust.
➜
Instructions for adjusting the settings
are provided in the following pages.
5
Press 2 to enter its options and use
1 2 3 4 to make your selection.
➜
If the selection in the menu is grayed
out, that means the feature is not
available or not possible to change at the
current state.
6
Press 1 to confirm.
7
To exit, press SYSTEM-MENU.
TIPS: Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
MRV660_17_Eng40

System Menu - Preferences

Recording

For more information on this menu,
please see pages 37~39 "Recording
settings."

Sound

{ Sound mode }
You can select from the following settings
how sound will be played back by devices
connected to the analog outputs (L/R
AUDIO OUT.)
– { Stereo } : To hear sound from the left and
– { Surround } : For audio device that is
{ Night mode }
Allows you to optimize the sound
dynamics at low volume. This causes less
disturbance in quiet environments. This
setting only functions with Dolby Digital
Audio on DVDs.
– { On } : Select this to level out the volume.
– { Off } : Select this when you want to enjoy
53
right audio channels. Use this setting when
the DVD recorder is connected to a stereo
TV.
compatible with Dolby Surround. Dolby
Digital and MPEG-2 multi-channel are
mixed to a Dolby Surround-compatible
two-channel output signal.
High volume outputs will be softened and
low volume outputs are brought upward to
an audible level.
the surround sound with its full dynamic
range.
9/3/05, 10:26 AM
53
3139 246 XXXXX