Program Favorite Tracks (Audio Cds And Vcds); Clearing The Program; Using The Menu Bar To Program - Magnavox MRD130 User Manual

Program favorite tracks
(audio CDs and VCDs)
You can play the contents of the disc in
the order you want by programming the
order of the tracks to be played. Up to 99
tracks can be stored.
1
Stop playback, then press PROG on the
front panel to enter program mode.
2
Use the numeric keypad (0-9) to enter
a valid track number.
➜
"FULL" will appear if you have
programmed 99 tracks.
3
Press OK to store the track.
4
2 3
Repeat steps ~
tracks.
5
Press ÉÅ to start program playback.

Clearing the program

G
Stop playback, then press the Ç again.
➜ "PROG CLR" appears.
Helpful Hints:
– If the DVD system is discoonected from
the power supply, it will erase the program.
– For VCD, the program option is only
possible if the PBC mode is turned off.
The operating features described here might not be possible for certain discs. Always refer
TIPS:
to the instructions supplied with the discs.
to select other
Disc Operations
Using the menu bar to
program
IMPORTANT!
You have to turn on your TV and set
to the correct Video In channel. (See
page 17 "Setting the TV".)
1
Stop playback, then press SYSTEM
MENU.
➜
The menu bar will appear across the
top of the TV screen.
2
Press 1 2 to select
enter the program menu.
PROGRAM P 00 : 00
3
Use the numeric keypad (0-9) to enter
the track number to be programmed.
➜
"FULL" will appear if you have
programmed 99 tracks.
4
Press ÉÅ to start program playback.
To clear the program
G
Stop playback, then press Çagain.
and press 4 to
25