I Position Data Transmission; I Printer Connection; I Pc Connection; I Digital Ani - Icom IC-F510 Instruction Manual

I Position data transmission

When the optional OPC-822
ceiver is connected to the transceiver, the position (longitude
and latitude) data can be transmitted automatically.
Ask your dealer or system operator for connection details.
The position data is transmitted when;
• Status 24 message is received
*When the status 24 message, GPS request, is received.
• Fully automatic
When automatic position transmission is enabled, send
the position data according to 'Time Marker' and 'Inter-
val' settings.
• PTT is released
When 'Send At Log-off' is enabled.
• After sending a status message
When 'Send With Status' is enabled.
• After sending an SDM
When 'Send With SDM' is enabled.
• After sending status 22 (Emergency)
When 'Send With Emergency' is enabled.
and a GPS re-
INTERFACE CABLE

I Printer connection

When the optional OPC-822
to the transceiver, a printer can be connected to printed out
the received SDM content and the ID of the station who sent
the message. Ask your dealer or system operator for connec-
tion details.

I PC connection

When the optional OPC-822
to the transceiver, a PC can be connected to provide remote
control, data reception, etc.
Ask your dealer or system operator for connection details.

I Digital ANI

The own ID can be transmitted each time the PTT is pushed
(log-in) or released (log-off) during individual or group call
communications.
By receiving the ANI, the communication log can be recorded
when using a PC dispatch application.
In addition, when using the ANI with log-in, the PTT side tone
function can be used to inform you that the ID is sent and
voice communication can be performed.
BIIS OPERATION
is connected
INTERFACE CABLE
is connected
INTERFACE CABLE
3
20