Basic Operation - Magnavox MTV-34, MTV-51, MTV-68 Use And Care Manual

BASIC OPERATION

DESCRIPTION OF OPERATION
You can press the buttons on the remote control or the menu button on the TV set to adjust the picture, clock, preset,
system and audio (68cm only) according to the menu shown on the screen.
PICTURE
bright
contrast
colour
sharp
tint
---------+-----
AUTO-SEARCH OPERATION
This function will automatically set the channels on 1,2,3,4 . If you wish to set the correct stations on the corresponding
channels see 'Channel Position.'
1. Press 'PRE' button on the remote control to display the preset menu.
2. Press 'P /P ' channel button to select AUTO-SEARCH item.
3. Press 'VOL /VOL ' volume button to start auto-search.
NOTE: You can store the TV channels from '0' position in numeral sequence. The channel position will be '0' again when
search is finished. The colour of '0' turns green when the program has been searched. Otherwise, it turns red.
8
AUDIO
45 volume
63 balance
63
63
63
---------+-----
PRESET
pos. 0
rem. on
band v-l
fine
semi-search
auto-search
---------+-----
PRESET
pos.
rem.
band
fine
semi-search
auto-search
---------+-----
SYSTEM
(MTV-68 ONLY)
32 colour-sys
00 sound-sys
coring
CLOCK
time
on-time
off-time
prompt
ch-time
pos.
0
on
v-l
auto
5.5m
on
16:00
--:--
--:--
--:--
16:25
10