• First Time Setup, and • Feature Operation. Do not attempt to return this product to the store. For fast help, call us first! Thank you for making Philips a part of your home! Television Television 1-800-531-0039 3121 235 20121...
And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome–and thanks for investing in a MAGNAVOX product. Sincerely, Philips Consumer Electronics Company Know these safety symbols...
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
OW TO SE THE o adjust your TV picture controls, select a channel and follow the steps shown below: Press the MENU button on the remote to display the on-screen menu. Press the CURSOR UP DOWN buttons until the word PIC- TURE is highlighted.
When finished, press the STATUS /EXIT button to remove the menu from the TV’s screen. MART “Noise” Reduction is a video adjustment feature that affects the picture quality of the TV not the sound. DNR (N OISE EDUCTION Main Picture...
Picture menu features until the word CONTRAST + is highlighted. Press the CURSOR RIGHT button turn the CONTRAST + feature ON or OFF. When finished, press the STATUS /EXIT button to remove the menu from the TV’s screen. + (B ONTRAST LACK Main Picture Brightness...
OW TO DJUST THE esides the normal volume level con- trol, your TV also has Bass, Treble and Balance sound controls. The TRE- BLE control effects only the high fre- quency sound coming from the TV enhancing the highs; while the BASS...
With the AVL (Audio Volume Leveler) control turned ON, you can have the TV level out sound that is being heard. This makes for a more consistent sound by reducing the peaks and valleys that occur during program changes or com- mercial breaks.
INCR. SURR. but- ton will cause either MONO or SPA- TIAL to appear on the the screen. If the TV signal is being received from a stereo source and the “Sound” control is set to Stereo, pressing the INCR.
SAP signal is an additional part of the stereo broadcast system. Sent as a third audio channel, a SAP signal can be heard apart from the current TV pro- gram sound. TV stations are free to use SAP for any number of purposes.
ETTING THE ou can receive broadcast stereo TV programs. The TV has both an amplifier and twin speakers through which the stereo sound can be heard. Press the MENU button on the remote to display the on-screen menu. Press the CURSOR UP...
STOP TIME: Use the numbered buttons to enter a time for the TV to shut itself off. CHANNEL: Use the Numbered buttons or the CH + or – buttons to select a specific channel for the TV to tune to at the specific Start Time.
ARENTAL UIDELINES (TV B ROADCASTERS TV-Y - (All children -- This program is designed to be appropriate for all chil- dren.) Designed for a very young audi- ence, including children ages 2-6. This type of programming is not expected to frighten younger children.
Access Code also Block Channel OffStop Time Setup Code Channel can be changed Clear All Activate Block All Display anytime using the Movie Rating Setup Code feature TV Rating Main Picture Timer Sound AutoLock Features Install POWER CLOCK Features TV/VCR Timer...
If you tune to a blocked chan- nel and enter your Access Code to view the channel, ALL blocked chan- nels will be viewable until the TV has been turned off. When the TV is pow- ered back ON, the previously blocked channels will be blocked again.
If you tune to a blocked chan- nel and enter your Access Code to view the channel, ALL blocked chan- nels will be viewable until the TV is powered OFf and then turned back ON. When the TV is powered back ON, the previously blocked channels will be blocked again.
Block All the television’s channels. Maybe you don’t want your children to watch TV for a given time. With the Block All control, ALL avail- able channels (including the A/V Inputs) can be set to block at the same time.
AutoLock feature. One is based on the Movie Industry rat- ings while the other is based on the TV Industry ratings. Both can be used to block or censor programming that has been rated in either manner.
ON or OFF. TV-Y - (All children -- This program is designed to be appropriate for all children.) Designed for a very young audience, including children ages 2-6. This type of program- ming is not expected to frighten younger children.
When in the OFF position, ALL blocking is disabled. UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this feature is set to ON and the BLOCKING feature is set to OFF.
CC information. When finished, press the STATUS /EXIT button to remove the menu from the TV’s screen or let the option time out and disappear from the TV screen. MART Not all TV programs and...
Audio/Video Output jacks. Connect one end of the VIDEO (yellow) CABLE to the AV1 in VIDEO jack on the back of the TV. Then con- nect one end the AUDIO (red and white) CABLES to the AV1 in AUDIO L and R(left and right) jacks on the rear of the TV.
For an external audio system, connect one end of the R(ight) and L(eft) AUDIO (Monitor Out) jacks on the TV to the R and L audio input jacks on your amplifier or sound system. Set the audio system’s volume to a normal listening level.
SING THE he S(uper)-Video connection on the rear of the TV can provide you with better picture detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections.
ETTING ave you ever fallen asleep in front of the TV only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatically turning itself off.
ETTING THE hether you’re watching a movie or a sporting event, your TV has automatic video control settings matched for your current program source or content. The Auto Picture fea- ture quickly resets your TV’s video con- trols for a number of different types of programs and viewing conditions you may have in your home.
VOICE - Preset sound options for pro- gramming where heavy dialogue is pres- ent. OUND Personal POWER SLEEP A/CH STATUS/EXIT CLOCK RECORD TV/VCR SMART SMART SMART SOUND PICTURE MENU SURF MUTE ONTROL Theatre Music Voice...
Press the CURSOR UP or CURSOR DOWN button to scroll the list of up to 8 channels. As you scroll to a channel the TV will tune to that channel. To remove a channel from the SURF list: Follow steps 4 and 5 to select a channel in the Surf list.
EMOTE SE WITH our remote control is set to work your TV and many infrared remote (IR) control VCRs, Cable Boxes, Satellite Systems, DBS, DVD, etc. However, an easy onetime step may be necessary before the remote will work your VCR.
Number for your brand of device, you are ready to follow the four simple steps below. Please read through steps 1-4 before beginning. Place the TV/VCR/ACC Mode Switch in the proper posi- tion. Press the VCR RECORD button on the remote control and release.
EMOTE SE WITH Search Method our TV remote can be set to work various external devices such as VCRs, Cable Boxes, Satellite Receivers, DBS, DVD, etc. by what is called the search method of remote control pro- gramming. If the “Remote Code” number...
Press while in the VCR mode (VCR indicator on the front of the unit will light) to view the playback of a tape. Press again to place in the TV position (VCR indicator light will go off) to view one program while recording another program.
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning. • When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.