Channel Selection; Power Button; Display Button - Magnavox MTV-34, MTV-51, MTV-68 Use And Care Manual

CHANNEL SELECTION

1. Power Button

Press POWER button on the TV set to turn it on.
If the TV set is under stand-by mode when you press the
POWER button on the TV, turn it on by pressing POWER
button on the remote control.

2. Display button

1. When the 'display' button is pressed the colour-
system and the sound-system will be displayed on
the screen and will disappear after 3 seconds.
DISP
12
5
POS
PAL
COLOUR-SYS.
5.5M
SOUND-SYS.
3. CHANNEL SELECTION
1. When the channel number has one figure, press the
number directly.
2. When the channel number has two figures,
press ' -- ' button at first. For example, press ' -- '
and then press '2' and '5' to select channel 25.
3. When the channel number has three figures, press
' -- ' button two times at first. For example, press
' -- ' two times and then press '1', '2', '5' to select
channel 125.
4. RETURN BUTTON
Press RETURN button recall the last program.