Advertisement
W
H
___rave you ever played hide and
• • seek with your remote
:ontrol? Are you tired of tearing
the' house apart trying to find if
someone has stuffed the remote
under the couch, put it on the
shelves, or hid it in the desk? Well,
your TV remote can save you all
that looking by automatically
signaling its location to you.
Here's how it works:
I_
Press the POWER button on
<
the set to turn the TV ON.
Note: Normally you can press any
button on the front of the TV to
tuna the set ON. But for the remote
locator to work you need to be sure
to use the Power button at the TV.
"LOCATING REMOTE" shows on
the TV screen.
<_
Within a few seconds a
chirping or beeping sound will
begin to come from the remote
control hand unit.
•The remote will continue to signal
s location for around 30 seconds.
i Normal TV program sound wilt not
be heard while the remote locator is
working.
_Once
you
remote just
find the
press any button on the remote and
the beeping sound will stop.
The remote is now ready for
normal TV feature use.
O
Remember., the remote
locator may not properly
receive its '%oming"signal from
the TV if it has been placed on a
metal shelf or counter material.
Also, since there's a special type
of radio frequency '%oming"
signal receiver inside the remote
we are required to notify you that
any changes or modifications not
xpressly approved by Philips
Consumer Electronics Company
could void the user's authority to
operate the remote equipment.
Your "IV is attempting
[
to locate
a lost
remote
I
Remote Locator
range is around 30 Feet.
Advertisement
