Advertisement
_
rrThe S(uper)-Video connection
.l
on the rear of the TV is used
for the playback of S-VHS VCR
tapes, Video Discs, or Compact
Disc Interactive (cd-i) discs.
Better picture detail and clarity
is possible with the S-Video
playback as compared to the
picture from a normal antenna
(RF) connection.
C-a-gdg
<_
Connect the S-VIDEO IN
Jack on the TV to the S-VHS
Out(put) jack on a S-VHS VCR.
The S-VHS connecting cable
will be supplied with the S-VHS
VCR (or Video Disc player.)
Also connect the AUDIO
IN(put) jacks from the TV to the
AUDIO OUT jacks on the VCR.
<_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word INPUT with the TV's
on-screen arrow.
_<_
Press
button
select the
(+)
to
S-VHS INPUT on the rear of the
TV.
I
<_
Turn the
and place
VCR ON
it in the S-VIDEO or S-VHS
mode. Insert a S-VHS cassette
tape and PLAY the VCR in a
normal manner.
O
Remember, when you're
a through using the S-VIDEO
IN(put) jack return the INPUT
control on the TV to ANTENNA. If
you leave the TV in the S-VIDEO
mode and there is no signal source
connected to the jack, you will be
seeing only a blank screen on the
TV.
PICTURE
AND
SOUND
FROM
PLAYBACK
OF S-VHS
VCR TAPE
RCA PHONO
PLUG CABLES
(NOT SUPPLIED)
VCR
S-VHS VCR
(EQUIPPED WITH S-VIDEO
OUTPUT
JACK)
NOTE: THE "I'V/VCR"
BUTTON
CAN ALSO BE USED TO PLACE
THE TV IN EITHER S-VIDEO OR
VCR/AUX
MODES (AS WELL AS
SELECT CHANNELS
3 OR 4.)
.€
qo
Advertisement
