Advertisement
yV
u can view the playback of
CR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the
playback of a VCR tape:
_,,_
Connect the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
_
Press the MENU (M) button
,on the remote, then press the
MENU • or • buttons to select
the word INPUT with the TV's
on-screen arrow.
Note: You can press the
CHANNEL ••
buttons to
.select "VCR/AUX" (if it has
been added to the TV's channel
memory.) See page 7 for details.
_._
Press the (+) button to select
the VCR/AUX(iliary) INPUTS
-_
on the rear of the TV.
4_
Turn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
O
gh using the A/V INPUT
jacks, return the INPUT display
screen on the TV to ANTENNA.
If you leave the TV in the
VCR/AUX INPUT mode and
there is no signal source connected
to the jacks, you will be seeing
only a blank screen on the TV.
NOTE: If you have a mono (single
audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center 1 800 292-6066) to connect
to the audio inputs on the TV.
PICTURE AND SOUND FROM
PLAYBACK
OF VCR TAPE
VIDEO IN
(YELLOW)
RCA PHONO PLUG
j
CABLF_
(NOT
SUPPLIED)
(RED_HrrE)[
_OF
VCR
pup
=888
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT
JACKS)
NOTE: THE "TV/VCR"
B_N
CAN ALSO BE USED TO PLACE
THE TV IN EITHER VCR/AUX OR
S-VIDEO
MODES (AS WELL AS
SELF_,C_ CHANNELS
3 OR 4.)
Advertisement
