Dodge 2016 Dart User Manual page 122

W H A T T O D O I N E M E R G E N C I E S
2. If equipped with aluminum wheels where the center cap covers the wheel bolts, use
the wheel bolt wrench to pry the center cap off carefully before raising the vehicle.
3. Before raising the vehicle, use the wheel bolt wrench to loosen, but not remove, the
wheel bolts on the wheel with the flat tire. Turn the wheel bolts counterclockwise one
turn while the wheel is still on the ground.
4. Place the jack underneath the notched lift area that is closest to the flat tire. Turn the
jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange,
centering the jack saddle between the locating notches on the sill flange.
5. Raise the vehicle just enough to remove
the flat tire and install the spare tire.
Raising the vehicle higher than necessary can make the vehicle less stable. It could slip
off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
120
Front Jacking Location
Rear Jacking Location
WARNING!