Dodge 2016 Dart User Manual page 120

W H A T T O D O I N E M E R G E N C I E S
Preparations For Jacking
1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible.
Avoid icy or slippery areas.
Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull
far enough off the road to avoid being hit when operating the jack or changing the
wheel.
2. Turn on the Hazard Warning flasher.
3. Set the parking brake.
4. Place the shift lever in PARK (automatic transmission) or REVERSE (manual trans-
mission).
5. Turn OFF the ignition.
6. Block both the front and rear of the wheel diagonally opposite of the jacking position.
For example, if changing the right front
tire, block the left rear wheel.
NOTE:
Passengers should not remain in the vehicle
when the vehicle is being jacked.
118
WARNING!
Wheel Blocked