Dodge 2016 Dart User Manual page 102

E L E C T R O N I C S
Trip Info
Push the UP or
Push the RIGHT
• Trip A
• Trip B
• Elapsed Time
Stored Message
Push the UP or
DID. This feature shows the number of stored warning messages. Pushing the RIGHT
button will allow you to see what the stored messages are. Push the LEFT
return to the Main Menu. The inner ring of the display will illuminate grey under normal
conditions, yellow for non critical warnings, red for critical warnings and white for on
demand information.
Screen Setup
• Screen Setup Display Analog Icon
• Screen Setup Display Digital Icon
Push the UP or DOWN
in the DID. Push the RIGHT
Setup feature allows you to change the location that information is displayed within the
instrument cluster. Use the UP and DOWN buttons to highlight a screen setup location
(i.e., Upper Left, Upper Right, etc.) then push the RIGHT arrow button to select the
location and make changes. Push the UP and DOWN buttons to select the information you
would like to display in that location (i.e., Date, Time, Outside Temp, etc.) and push the
RIGHT arrow button to save the display setting. You can push the LEFT arrow button at any
time to back out of a submenu selection.
NOTE:
This option is only available when the vehicle is in the Park position.
Driver Selectable Items
Speedometer
Gear Display
100
DOWN button until the Trip Info icon is highlighted in the DID.
button to display the following three trip features in the next screen:
DOWN button until the Messages display icon is highlighted in the
button until the Screen Setup display icon is highlighted
button to enter the Screen Setup submenu. The Screen
• Analog 1
• Analog 2
• Digital 1 (default setting)
• Digital 2
• Standard (PRND –/+) (default setting)
• Single Character (D)
• Word (Drive)
button to