Table of Contents
Advertisement
INSTALLATION
To properly install your new USB modem, please follow the instructions below:
1. Turn on your computer and log into Windows.
2. Place the Driver CD into the CD-ROM drive of your computer.
3. The "USB 56K V.92 Modem" driver installation screen will start automatically.
4. Select the corresponding operating system of your computer and follow the onscreen
instructions to finish the driver installation.
5. After the driver installation is finished connect your USB Modem to an available USB
port of your computer. Windows "Found New Hardware" Wizard will start automatically.
6. Follow the onscreen instruction to finish the installation.
7. Windows may notify you that the software that you are installing has not passed
Windows logo testing; if this occurs, please click "Continue Anyway" to continue.
8. After the installation is complete, click "Finish".
9. Your new USB Modem is now ready for use.
Manual Dial-up Connection Settings
Windows XP
1. On
Control Panel/Network
Connections, click
Create a new
3
www.encore-usa.com
connection.
Advertisement
Table of Contents
