(Info)/Set Switch; (Pre-Collision Braking System Off) Switch; (Lane Departure Warning Off) Switch - Subaru EyeSight Owner's Manual

■

(Info)/SET switch

This is used in the following situations.
• When displaying the message that appeared in the pop-up screen area again.
⇒
Refer to page 84.
• When changing the Warning Volume settings, etc.
⇒
Refer to page 82.
■

(Pre-Collision Braking System OFF) switch

Press and hold this switch for approximately 2
seconds or longer to turn off the Pre-Collision
Braking System and Pre-Collision Throttle
Management.
When these functions are off, the Pre-
Collision Braking System OFF indicator light
on the instrument panel illuminates.
Press and hold the switch again to turn on the
Pre-Collision Braking
Collision Throttle Management. This turns off
the Pre-Collision Braking System OFF indica-
tor light.
⇒
Refer to page 31.
■

(Lane Departure Warning OFF) switch

Press and hold this switch for approximately 2
seconds or longer to turn off the Lane
Departure Warning and Lane Sway Warning
functions.
When these functions are off, the Lane
Departure Warning OFF indicator light on the
instrument panel illuminates.
Press and hold the switch again to turn on the
Lane Departure Warning and Lane Sway
Warning functions. This turns off the Lane
Departure Warning OFF indicator light.
⇒
Refer to page 61.
* Refer to page 58.
System and Pre-
About EyeSight
S00813
S00814
19