Epson SureColor F-Series Network Manual page 54

Option
Group Policy n
(n = 1–10)
Access Control
Remote Address
2
(Host)
Method of Choose
Port
Service Name
1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config
to find the printer.
2. A static IP address is recommended. If DHCP or "obtain automatically" (IPv6) is selected, the connection
may terminate when the lease or address expires.
Note:
Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port
Number.
Sample 3
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control
> Group Policy settings for each client.
Refusing Access from Unauthorized Clients
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control
> Default Policy settings as follows:
Option
IPsec/Access Control
Default Policy > Access Control
Administrator Client Settings
Separate settings must be created for each Group Policy in IPsec/Access Control.
Group policies are applied in order from Group Policy 1.
Setting
RAW (Port 9100)
Enable
Access Permission
Enter the print client IP address (prefix length can be used to specify
range if desired).
Example (IPv4): 192.168.0.0/24
Service Name
RAW (Port 9100)
Setting
Enable
Access Refuse
ENPC
ENPC
SNMP
SNMP
Tips for Administrator
54