Vita-Mix PROFESSIONAL 750 Owner's Manual page 10

PA RTS A N D F E AT U R E S
To Lock the Lid in Place: Position the lid on the container with th lid flaps midway
between the spout and the handle. Push the lid onto the container until it locks
into place. The lid must always be secured when processing, especially when
blending hot liquids that may scald. Never operate the blender without checking
to make sure that the lid is securely locked in place.
To Remove the Lid: Lift up on one lid flap, while holding the container securely.
To Remove the Lid Cap: Rotate the lid cap anti-clockwise from the "locked" to the
"unlocked" position and lift out.
Automatic Overload Protection: Your Vitamix motor is designed to protect itself
from overheating. If the motor shuts off, follow these instructions:
Turn off the power switch for up to 45 minutes to reset. The reset time will be
extended if high room temperatures exist. To reduce the reset time, unplug the
machine, remove the container and blow air into the centre section of the bottom
with a hair dryer on the cool setting.
Power Cable: Your machine is
equipped with a long power
cable. Store the unused
portion neatly underneath.
Bottom View / Cable Wrap:
Plastic cable retainers hold
the cable securely. They are
flexible and return to position
after the cable is lifted out.
10
Front
Back
On / Off
Switch