Troubleshooting - Vita-Mix PROFESSIONAL 750 Owner's Manual

T R OUB LE S HO OT I NG
Your Vitamix motor is designed to be protected from overheating and
over-current conditions during use. Both features will shut off the motor. The
motor will possibly emit a slight odour. Follow the procedures below to reset
the motor for either situation. If you continue to experience problems after
following these instructions, contact your local distributor immediately for
instructions.
Overheating Protection Resetting Procedure
If the motor shuts off due to overheating while blending, allow the machine to
cool for 20-45 minutes before beginning another blending cycle. If the motor
will not start after being allowed to cool, perform the Automatic Over-current
Protection Resetting Procedure below.
Overcurrent Protection Resetting Procedure
1. Push the On / Off switch down to the Off position (O).
2.
Unplug the unit.
3.
Remove the container.
4. Turn the motor base on its side.
5.
Press the reset button on the bottom of the machine.
6.
Plug unit in and continue with the blending cycle.
If the blender will not start immediately, the motor has overheated. Allow the
motor to cool for 20-45 minutes before beginning another blending cycle.
Front
Back
Reset Button
25